Now you will need to assign a firewall zone.Now click on the Advanced Settings tab and uncheck Use DNS servers advertised by peer and enter Surfshark DNS addresses which are:.In the IP Address box, enter the IP address from the Surfshark WireGuard server file. In our case, it's 10.14.0.2/16. Copy and paste it into the Private Key area. Now you will need to enter the Private key which you generated at the beginning of the article.Click on Network, then select Interfaces, and at the bottom of the page select Add new interface. Now we will need to install the WireGuard interface.After the reboot is done, log in to your router again. To do so, click on System, and then click Reboot. Now you will need to restart the router.Once the lists are updated, in the search field type WireGuard, and install the WireGuard package first, following with luci-app-wireguard.On this page, we will download the WireGuard package.Once logged in, click on System and select Software.Routers flashed with OpenWRT firmware image initially accept connections only through the telnet protocol, so you should connect to telnet with the following IP address: 192.168.1.1 and change the root password with the command " passwd". Firstly, you need to access your router by accessing one of the following websites on your browser:.In the end, even if you already did or didn't have a key pair, you will see a Choose a location button, click on it and you will see a full list of available locations to connect to. Note: once the key pairs are generated, copy them and store them on your device, as you will not be able to check them again. In the next window, click on I don't have a key pair.In the next window, click on I have a key pair.Go to this page, choose the Router option and click on WireGuard.If you have a key pair, continue the tutorial as usual, and if you have not created a key pair, click here. There are two routes we can take at this stage - either you have already generated a key pair and will use them for this setup, or you have never generated them in the first place. In this article, you will learn how to set up a manual WireGuard connection on your OpenWRT firmware router.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |